Steel-Ply is the most productive, pre engineered reusable factory built concrete forming system in use today.
It is designed for maximum versatility and can be used to form virtually any concrete structure.
Available size: 9′ and 10″ tall panel from 4″ to 30″
Inside Corner
6″X6″, 4″X4″
Outside Corner
2-1/2″X2-1/2″
Hinged
Outside Corner
Hinged
Inside Corner 6″X6″
Metal Filler
1″, 1-1/2″, 2″
Handset Scaffold Bracket
Straight / Bent Turnbuckle
Wedge Bolt
Long Wedge Bolt
HEAVY DUTY LOOP TIE
Loop Ties are designed for securing and spacing modular type forms.
Heavy duty loop ties are sold in 50 or 100 per box depending on size.
Available size 8” 10” 12” 26” 28”
Flat Ties
Flat Ties are used with Wedge Bolts to secure and space modular forms. Flat ties are available in 6″ up to 48″ in 2″ increments.
WALER TIE
Waler Ties are used with the Z-Tie Holder. Waler Ties come in two lengths to accommodate 2″x4″ and 2″x6″ lumber.
ONE PC WALER CLAMP
Z-TIE HOLDER
The Z-Tie Holder is another method for attaching walers and can also be used for strongbacks.
Strong Back/Stiff Back Ties
Strong Back/Stiff Back Ties are used with the Z-Tie Holder. These ties come in 3 lengths and are used for vertical alignment strong backs.
LOOP COIL TIE 4″ & 6″
REBAR HOOK 1/2″ ROD #6 BAR
RESI COIL TIE 4″ & 6″
SNAP COIL TIE
COIL LAG FOR 1/2″ COIL ROD
1/4″X3/4″ ALUMINUM RIVET
1/4″X1″ ALUMINUM RIVET
Coil Rods
Coil rods are used in concrete forming applications. Their loose threads design curtails dust and dirt accumulation.
High Tensile Coil Rod is a continuous threaded rod, made from high carbon, cold rolled, 1045 steel. The Coil Rod is manufactured in high-tensile strength in 12 ft standard lengths, in 1/2”, 5/8″, 3/4”, 7/8″, 1”, 1-1/4″, 1-1/2″, diameters.
1/2″ FLAT WASHER 3″X4″X1/4″
3/4″ FLAT WASHER 4″X5″X1/4″
1″ FLAT WASHER 5″X5″X7/16″
1-1/4″ FLAT WASHER 5″X5″X5/8″
COIL NUTS 1/2”, 5/8″, 3/4”, 7/8″, 1″, 1-1/4″, 1-1/2″
Coil Thread Drop In Anchors ½” & ¾”
